Data Code | Short Description | Long Description | Address Field |
CJ | Late Close | An area was armed after the closing window | User number |
CK | Early Close | An area was armed before the closing window | User number |
CL | Closing Report | System armed, normal | User number |
CM | Missing Alarm - Recent Closing | A point has gone missing within 2 minutes of closing | Zone or point |
CO | Command Sent | A command has been sent to an expansion/peripheral device | Condition number |
CP | Automatic Closing | System armed automatically | User number |
CQ | Remote Closing | The system was armed from a remote location | User number |
CR | Recent Closing | An alarm occurred within five minutes after the system was closed | User number |
CS | Closing Keyswitch | Account has been armed by keyswitch | Zone or point |
CT | Late to Open | System was not disarmed on time | Area number |
CW | Was Force Armed | Header for a force armed session, forced point msgs may follow | Area number |
CX | Custom Function Executed | The panel has executed a preprogrammed set of instructions | Custom Function number |
CZ | Point Closing | A point, as opposed to a whole area or account, has closed | Zone or point |
DA | Card Assigned | An access ID has been added to the controller | User number |
DB | Card Deleted | An access ID has been deleted from the controller | User number |
DC | Access Closed | Access to all users prohibited | Door number |
DD | Access Denied | Access denied, unknown code | Door number |
DE | Request to Enter | An access point was opened via a Request to Enter device | Door number |
DF | Door Forced | Door opened without access request | Door number |
DG | Access Granted | Door access granted | Door number |
DH | Door Left Open - Restoral | An access point in a Door Left Open state has restored | Door number |
DI | Access Denied – Passback | Access denied because credential has not exited area before attempting to re-enter same area | Door number |
DJ | Door Forced - Trouble | An access point has been forced open in an unarmed area | Door number |
DK | Access Lockout | Access denied, known code | Door number |
DL | Door Left Open - Alarm | An open access point when open time expired in an armed area | Door number |
DM | Door Left Open - Trouble | An open access point when open time expired in an unarmed area | Door number |
DN | Door Left Open (non-alarm, non-trouble) | An access point was open when the door cycle time expired | Door number |
DO | Access Open | Access to authorized users allowed | Door number |
DP | Access Denied - Unauthorized Time | An access request was denied because the request is occurring outside the user’s authorized time window(s) | Door number |
DQ | Access Denied Unauthorized Arming State | An access request was denied because the user was not authorized in this area when the area was armed | Door number |
DR | Door Restoral | Access alarm/trouble condition eliminated | Door number |
DS | Door Station | Identifies door for next report | Door number |
Data Code | Short Description | Long Description | Address Field |
DT | Access Trouble | Access system trouble | Unused |
DU | Dealer ID | Dealer ID number | Dealer ID |
DV | Access Denied Unauthorized Entry Level | An access request was denied because the user is not authorized in this area | Door number |
DW | Access Denied - Interlock | An access request was denied because the doors associated Interlock point is open | Door number |
DX | Request to Exit | An access point was opened via a Request to Exit device | Door number |
DY | Door Locked | The door’s lock has been engaged | Door number |
DZ | Access Denied - Door Secured | An access request was denied because the door has been placed in an Access Closed state | Door number |
EA | Exit Alarm | An exit zone remained violated at the end of the exit delay period | Zone or point |
EE | Exit Error | An exit zone remained violated at the end of the exit delay period | User number |
EJ | Expansion Tamper Restore | Expansion device tamper restoral | Expansion device number |
EM | Expansion Device Missing | Expansion device missing | Expansion device number |
EN | Expansion Missing Restore | Expansion device communications re-established | Expansion device number |
ER | Expansion Restoral | Expansion device trouble eliminated | Expander number |
ES | Expansion Device Tamper | Expansion device enclosure tamper | Expansion device number |
ET | Expansion Trouble | Expansion device trouble | Expander number |
EX | External Device Condition | A specific reportable condition is detected on an external device | Device number |
EZ | Missing Alarm - Exit Error | A point remained missing at the end of the exit delay period | Point number |
FA | Fire Alarm | Fire condition detected | Zone or point |
FB | Fire Bypass | Zone has been bypassed | Zone or point |
FC | Fire Cancel | A Fire Alarm has been cancelled by an authorized person | Zone or point |
FG | Unverified Event – Fire | A point assigned to a Cross Point group has gone into alarm but the Cross Point remained normal | Zone or point |
FH | Fire Alarm Restore | Alarm condition eliminated | Zone or point |
FI | Fire Test Begin | The transmitter area's fire test has begun | Area number |
FJ | Fire Trouble Restore | Trouble condition eliminated | Zone or point |
FK | Fire Test End | The transmitter area's fire test has ended | Area number |
FL | Fire Alarm Silenced | The fire panel’s sounder was silenced by command | Zone or point |
FM | Fire Alarm - Cross Point | Fire Alarm with Cross Point also in alarm verifying the Fire Alarm | Point number |
FQ | Fire Supervisory Trouble Restore | A fire supervisory zone that was in trouble condition has now restored to normal | Zone or point |
FR | Fire Restoral | Alarm/trouble condition has been eliminated | Zone or point |
Data Code | Short Description | Long Description | Address Field |
FS | Fire Supervisory | Unsafe fire detection system condition | Zone or point |
FT | Fire Trouble | Zone disabled by fault | Zone or point |
FU | Fire Unbypass | Bypass has been removed | Zone or point |
FV | Fire Supervision Restore | A fire supervision zone that was in alarm has restored to normal | Zone or point |
FW | Fire Supervisory Trouble | A fire supervisory zone is now in a trouble condition | Zone or point |
FX | Fire Test | Fire zone activated during test | Zone or point |
FY | Missing Fire Trouble | A fire point is now logically missing | Zone or point |
FZ | Missing Fire Supervision | A Fire Supervisory point has gone missing | Zone or point |
GA | Gas Alarm | Gas alarm condition detected | Zone or point |
GB | Gas Bypass | Zone has been bypassed | Zone or point |
GH | Gas Alarm Restore | Alarm condition eliminated | Zone or point |
GJ | Gas Trouble Restore | Trouble condition eliminated | Zone or point |
GR | Gas Restoral | Alarm/trouble condition has been eliminated | Zone or point |
GS | Gas Supervisory | Unsafe gas detection system condition | Zone or point |
GT | Gas Trouble | Zone disabled by fault | Zone or point |
GU | Gas Unbypass | Bypass has been removed | Zone or point |
GX | Gas Test | Zone activated during test | Zone or point |
HA | Holdup Alarm | Silent alarm, user under duress | Zone or point |
HB | Holdup Bypass | Zone has been bypassed | Zone or point |
HH | Holdup Alarm Restore | Alarm condition eliminated | Zone or point |
HJ | Holdup Trouble Restore | Trouble condition eliminated | Zone or point |
HR | Holdup Restoral | Alarm/trouble condition has been eliminated | Zone or point |
HS | Holdup Supervisory | Unsafe holdup system condition | Zone or point |
HT | Holdup Trouble | Zone disabled by fault | Zone or point |
HU | Holdup Unbypass | Bypass has been removed | Zone or point |
IA | Equipment Failure Condition | A specific, reportable condition is detected on a device | Point number |
IR | Equipment Fail - Restoral | The equipment condition has been restored to normal | Point number |
JA | User Code Tamper | Too many unsuccessful attempts have been made to enter a user ID | Area number |
JD | Date Changed | The date was changed in the transmitter/receiver | User number |
JH | Holiday Changed | The transmitter's holiday schedule has been changed | User number |
JK | Latchkey Alert | A designated user passcode has not been entered during a scheduled time window | User number |
JL | Log Threshold | The transmitter's log memory has reached its threshold level | Unused |
JO | Log Overflow | The transmitter's log memory has overflowed | Unused |
JP | User On Premises | A designated user passcode has been used to gain access to the premises. | User number |
Data Code | Short Description | Long Description | Address Field |
JR | Schedule Executed | An automatic scheduled event was executed | Area number |
JS | Schedule Changed | An automatic schedule was changed | User number |
JT | Time Changed | The time was changed in the transmitter/receiver | User number |
JV | User Code Changed | A user's code has been changed | User number |
JX | User Code Deleted | A user's code has been removed | User number |
JY | User Code Added | A user’s code has been added | User number |
JZ | User Level Set | A user’s authority level has been set | User number |
KA | Heat Alarm | High temperature detected on premise | Zone or point |
KB | Heat Bypass | Zone has been bypassed | Zone or point |
KH | Heat Alarm Restore | Alarm condition eliminated | Zone or point |
KJ | Heat Trouble Restore | Trouble condition eliminated | Zone or point |
KR | Heat Restoral | Alarm/trouble condition has been eliminated | Zone or point |
KS | Heat Supervisory | Unsafe heat detection system condition | Zone or point |
KT | Heat Trouble | Zone disabled by fault | Zone or point |
KU | Heat Unbypass | Bypass has been removed | Zone or point |
LB | Local Program | Begin local programming | Unused |
LD | Local Program Denied | Access code incorrect | Unused |
LE | Listen-in Ended | The listen-in session has been terminated | Unused |
LF | Listen-in Begin | The listen-in session with the RECEIVER has begun | Unused |
LR | Phone Line Restoral | Phone line restored to service | Line number |
LS | Local Program Success | Local programming successful | Unused |
LT | Phone Line Trouble | Phone line trouble report | Line number |
LU | Local Program Fail | Local programming unsuccessful | Unused |
LX | Local Programming Ended | A local programming session has been terminated | Unused |
MA | Medical Alarm | Emergency assistance request | Zone or point |
MB | Medical Bypass | Zone has been bypassed | Zone or point |
MH | Medical Alarm Restore | Alarm condition eliminated | Zone or point |
MI | Message | A canned message is being sent | Message number |
MJ | Medical Trouble Restore | Trouble condition eliminated | Zone or point |
MR | Medical Restoral | Alarm/trouble condition has been eliminated | Zone or point |
MS | Medical Supervisory | Unsafe system condition exists | Zone or point |
MT | Medical Trouble | Zone disabled by fault | Zone or point |
MU | Medical Unbypass | Bypass has been removed | Zone or point |
NA | No Activity | There has been no zone activity for a programmed amount of time | Zone number |
NC | Network Condition | A communications network has a specific reportable condition | Network number |
NF | Forced Perimeter Arm | Some zones/points not ready | Area number |
Data Code | Short Description | Long Description | Address Field |
NL | Perimeter Armed | An area has been perimeter armed | Area number |
NM | Perimeter Armed, User Defined | A user defined area has been perimeter armed | Area number |
NR | Network Restoral | A communications network has returned to normal operation | Network number |
NS | Activity Resumed | A zone has detected activity after an alert | Zone number |
NT | Network Failure | A communications network has failed | Network number |
OA | Automatic Opening | System has disarmed automatically | Area number |
OC | Cancel Report | Untyped zone cancel | User number |
OG | Open Area | System has been partially disarmed | Area number |
OH | Early to Open from Alarm | An area in alarm was disarmed before the opening window | User number |
OI | Fail to Open | An area has not been armed at the end of the opening window | Area number |
OJ | Late Open | An area was disarmed after the opening window | User number |
OK | Early Open | An area was disarmed before the opening window | User number |
OL | Late to Open from Alarm | An area in alarm was disarmed after the opening window | User number |
OP | Opening Report | Account was disarmed | User number |
OQ | Remote Opening | The system was disarmed from a remote location | User number |
OR | Disarm From Alarm | Account in alarm was reset/disarmed | User number |
OS | Opening Keyswitch | Account has been disarmed by keyswitch | Zone or point |
OT | Late To Close | System was not armed on time | User number |
OU | Output State – Trouble | An output on a peripheral device or NAC is not functioning | Output number |
OV | Output State – Restore | An output on a peripheral device or NAC is back to normal operation | Output number |
OZ | Point Opening | A point, rather than a full area or account, disarmed | Zone or point |
PA | Panic Alarm | Emergency assistance request, manually activated | Zone or point |
PB | Panic Bypass | Panic zone has been bypassed | Zone or point |
PH | Panic Alarm Restore | Alarm condition eliminated | Zone or point |
PJ | Panic Trouble Restore | Trouble condition eliminated | Zone or point |
PR | Panic Restoral | Alarm/trouble condition has been eliminated | Zone or point |
PS | Panic Supervisory | Unsafe system condition exists | Zone or point |
PT | Panic Trouble | Zone disabled by fault | Zone or point |
PU | Panic Unbypass | Panic zone bypass has been removed | Zone or point |
QA | Emergency Alarm | Emergency assistance request | Zone or point |
QB | Emergency Bypass | Zone has been bypassed | Zone or point |
QH | Emergency Alarm Restore | Alarm condition has been eliminated | Zone or point |
QJ | Emergency Trouble Restore | Trouble condition has been eliminated | Zone or point |
QR | Emergency Restoral | Alarm/trouble condition has been eliminated | Zone or point |
Data Code | Short Description | Long Description | Address Field |
QS | Emergency Supervisory | Unsafe system condition exists | Zone or point |
QT | Emergency Trouble | Zone disabled by fault | Zone or point |
QU | Emergency Unbypass | Bypass has been removed | Zone or point |
RA | Remote Programmer Call Failed | Transmitter failed to communicate with the remote programmer | Unused |
RB | Remote Program Begin | Remote programming session initiated | Unused |
RC | Relay Close | A relay has energized | Relay number |
RD | Remote Program Denied | Access passcode incorrect | Unused |
RN | Remote Reset | A TRANSMITTER was reset via a remote programmer | Unused |
RO | Relay Open | A relay has de-energized | Relay number |
RP | Automatic Test | Automatic communication test report | Unused |
RR | Power Up | System lost power, is now restored | Unused |
RS | Remote Program Success | Remote programming successful | Unused |
RT | Data Lost | Dialer data lost, transmission error | Line number |
RU | Remote Program Fail | Remote programming unsuccessful | Unused |
RX | Manual Test | Manual communication test report | User number |
RY | Test Off Normal | Test signal(s) indicates abnormal condition(s) exist | Zone or point |
SA | Sprinkler Alarm | Sprinkler flow condition exists | Zone or point |
SB | Sprinkler Bypass | Sprinkler zone has been bypassed | Zone or point |
SC | Change of State | An expansion/peripheral device is reporting a new condition or state change | Condition number |
SH | Sprinkler Alarm Restore | Alarm condition eliminated | Zone or point |
SJ | Sprinkler Trouble Restore | Trouble condition eliminated | Zone or point |
SR | Sprinkler Restoral | Alarm/trouble condition has been eliminated | Zone or point |
SS | Sprinkler Supervisory | Unsafe sprinkler system condition | Zone or point |
ST | Sprinkler Trouble | Zone disabled by fault | Zone or point |
SU | Sprinkler Unbypass | Sprinkler zone bypass has been removed | Zone or point |
TA | Tamper Alarm | Alarm equipment enclosure opened | Zone or point |
TB | Tamper Bypass | Tamper detection has been bypassed | Zone or point |
TC | All Points Tested | All point tested | Unused |
TE | Test End | Communicator restored to operation | Unused |
TH | Tamper Alarm Restore | An Expansion Device’s tamper switch restores to normal from an Alarm state | Unused |
TJ | Tamper Trouble Restore | An Expansion Device’s tamper switch restores to normal from a Trouble state | Unused |
TP | Walk Test Point | This point was tested during a Walk Test | Point number |
TR | Tamper Restoral | Alarm equipment enclosure has been closed | Zone or point |
TS | Test Start | Communicator taken out of operation | Unused |
Data Code | Short Description | Long Description | Address Field |
TT | Tamper Trouble | Equipment enclosure opened in disarmed state | Zone or point |
TU | Tamper Unbypass | Tamper detection bypass has been removed | Zone or point |
TW | Area Watch Start | Area watch feature has been activated | Unused |
TX | Test Report | An unspecified (manual or automatic) communicator test | Unused |
TZ | Area Watch End | Area watch feature has been deactivated | Unused |
UA | Untyped Zone Alarm | Alarm condition from zone of unknown type | Zone or point |
UB | Untyped Zone Bypass | Zone of unknown type has been bypassed | Zone or point |
UG | Unverified Event – Untyped | A point assigned to a Cross Point group has gone into alarm but the Cross Point remained normal | Zone or point |
UH | Untyped Alarm Restore | Alarm condition eliminated | Zone or point |
UJ | Untyped Trouble Restore | Trouble condition eliminated | Zone or point |
UR | Untyped Zone Restoral | Alarm/trouble condition eliminated from zone of unknown type | Zone or point |
US | Untyped Zone Supervisory | Unsafe condition from zone of unknown type | Zone or point |
UT | Untyped Zone Trouble | Trouble condition from zone of unknown type | Zone or point |
UU | Untyped Zone Unbypass | Bypass on zone of unknown type has been removed | Zone or point |
UX | Undefined | An undefined alarm condition has occurred | Unused |
UY | Untyped Missing Trouble | A point or device which was not armed is now logically missing | Zone or point |
UZ | Untyped Missing Alarm | A point or device which was armed is now logically missing | Zone or point |
VI | Printer Paper In | TRANSMITTER or RECEIVER paper in | Printer number |
VO | Printer Paper Out | TRANSMITTER or RECEIVER paper out | Printer number |
VR | Printer Restore | TRANSMITTER or RECEIVER trouble restored | Printer number |
VT | Printer Trouble | TRANSMITTER or RECEIVER trouble | Printer number |
VX | Printer Test | TRANSMITTER or RECEIVER test | Printer number |
VY | Printer Online | RECEIVER’S printer is now online | Unused |
VZ | Printer Offline | RECEIVER’S printer is now offline | Unused |
WA | Water Alarm | Water detected at protected premises | Zone or point |
WB | Water Bypass | Water detection has been bypassed | Zone or point |
WH | Water Alarm Restore | Water alarm condition eliminated | Zone or point |
WJ | Water Trouble Restore | Water trouble condition eliminated | Zone or point |
WR | Water Restoral | Water alarm/trouble condition has been eliminated | Zone or point |
WS | Water Supervisory | Water unsafe water detection system condition | Zone or point |
WT | Water Trouble | Water zone disabled by fault | Zone or point |
WU | Water Unbypass | Water detection bypass has been removed | Zone or point |
XA | Extra Account Report | CS RECEIVER has received an event from a non-existent account | Unused |
XE | Extra Point | Panel has sensed an extra point not specified for this site | Point number |
XF | Extra RF Point | Panel has sensed an extra RF point not specified for this site | Point number |
Data Code | Short Description | Long Description | Address Field |
XH | RF Interference Restoral | A radio device is no longer detecting RF Interference | Receiver number |
XI | Sensor Reset | A user has reset a sensor | Zone or point |
XJ | RF Receiver Tamper Restoral | A Tamper condition at a premises RF Receiver has been restored | Receiver number |
XL | Low Received Signal Strength | The RF signal strength of a reported event is below minimum level | Receiver number |
XM | Missing Alarm - Cross Point | Missing Alarm verified by Cross Point in Alarm (or missing) | Zone or point |
XQ | RF Interference | A radio device is detecting RF Interference | Receiver number |
XR | Transmitter Battery Restoral | Low battery has been corrected | Zone or point |
XS | RF Receiver Tamper | A Tamper condition at a premises receiver is detected | Receiver number |
XT | Transmitter Battery Trouble | Low battery in wireless transmitter | Zone or point |
XW | Forced Point | A point was forced out of the system at arm time | Zone or point |
XX | Fail to Test | A specific test from a panel was not received | Unused |
YA | Bell Fault | A trouble condition has been detected on a Local Bell, Siren, or Annunciator | Unused |
YB | Busy Seconds | Percent of time receiver's line card is on-line | Line card number |
YC | Communications Fail | RECEIVER and TRANSMITTER | Unused |
YD | Receiver Line Card Trouble | A line card identified by the passed address is in trouble | Line card number |
YE | Receiver Line Card Restored | A line card identified by the passed address is restored | Line card number |
YF | Parameter Checksum Fail | System data corrupted | Unused |
YG | Parameter Changed | A TRANSMITTER’S parameters have been changed | Unused |
YH | Bell Restored | A trouble condition has been restored on a Local Bell, Siren, or Annunciator | Unused |
YI | Overcurrent Trouble | An Expansion Device has detected an overcurrent condition | Unused |
YJ | Overcurrent Restore | An Expansion Device has restored from an overcurrent condition | Unused |
YK | Communications Restoral | TRANSMITTER has resumed communication with a RECEIVER | Unused |
YM | System Battery Missing | TRANSMITTER/RECEIVER battery is missing | Unused |
YN | Invalid Report | TRANSMITTER has sent a packet with invalid data | Unused |
YO | Unknown Message | An unknown message was received from automation or the printer | Unused |
YP | Power Supply Trouble | TRANSMITTER/RECEIVER has a problem with the power supply | Unused |
YQ | Power Supply Restored | TRANSMITTER’S/RECEIVER’S power supply has been restored | Unused |
YR | System Battery Restoral | Low battery has been corrected | Unused |
YS | Communications Trouble | RECEIVER and TRANSMITTER | Unused |
Data Code | Short Description | Long Description | Address Field |
YT | System Battery Trouble | Low battery in control/communicator | Unused |
YU | Diagnostic Error | An expansion/peripheral device is reporting a diagnostic error | Condition number |
YW | Watchdog Reset | The TRANSMITTER created an internal reset | Unused |
YX | Service Required | A TRANSMITTER/RECEIVER needs service | Unused |
YY | Status Report | This is a header for an account status report transmission | Unused |
YZ | Service Completed | Required TRANSMITTER / RECEIVER service completed | Mfr defined |
ZA | Freeze Alarm | Low temperature detected at premises | Zone or point |
ZB | Freeze Bypass | Low temperature detection has been bypassed | Zone or point |
ZH | Freeze Alarm Restore | Alarm condition eliminated | Zone or point |
ZJ | Freeze Trouble Restore | Trouble condition eliminated | Zone or point |
ZR | Freeze Restoral | Alarm/trouble condition has been eliminated | Zone or point |
ZS | Freeze Supervisory | Unsafe freeze detection system condition | Zone or point |
ZT | Freeze Trouble | Zone disabled by fault | Zone or point |
ZU | Freeze Unbypass | Low temperature detection bypass removed | Zone or point |